Anti-slip mat | 200 x 200 x 4 mm

Item number: - Categories: ,
  • Friction coefficient increase
  • Reduces the number of lashing straps required
  • Rubber material is suitable for unprotected applications exposed to the elements
  • Meets the requirements of VDI guideline 2700ff, sheet 3.2, sheets 9 and 15
From: 0,45 € per piece / plus VAT
Bulk prices per piece Single Package: 175 pcs.
Price incl. VAT 0,54 € 0,54 €
Price plus VAT 0,45 € 0,45 €

From: 0,45 

Plus 19% VAT
Delivery Time: ca. 2-3 business days

Anti-slip mat | 200 x 200 x 4 mm | Pads

Rubber anti-slip mats are a simple but effective means of increasing the coefficient of friction in load securing. The quality-tested material is placed under the goods or pallet and reduces the number of necessary lashing straps. Anti-slip rubber is therefore recommended as a cost-effective and also comparatively very efficient aid for securing loads in containers and truck shipping.

The friction between two materials – e.g. between a Euro pallet and the truck bed (rough/smooth) – is defined as the coefficient of friction. The use of anti-slip mats increases the coefficient of friction, so that the goods do not slip so quickly. The forces to be secured in accordance with the CTU Code are therefore significantly lower and the shipper can use less expensive load securing equipment (e.g. lashing straps, dunnage bags, etc.). Particularly in the freight sector, this can contribute to higher loading weights being possible.

The PU-bonded rubber offers a sliding friction coefficient of 0.6 µ to 0.9 µ (depending on the respective material pairing), is temperature-resistant from -30 to 100 °C and is also suitable for unprotected weathering. The format is ideal for applications with Euro pallets.

For more info on anti-slip mats, visit our blog section.

  • PU bonded rubber granule mat black
  • bonded with polyurethane (PUR)
  • DIN 7715-5 P2 / P3
  • Temperature resistant from -30 to 100 °C
  • Sliding friction coefficient 0.6 µ to 0.9 µ (depending on the respective material pairing)
  • Format: 200 x 200 x 4 mm

According to VDI Guideline 2700ff, Sheet 3.2, Sheets 9 and 15, the maximum load of anti-slip mats should be selected so that 30% deformation of the material thickness is not exceeded.

Bewertungen

There are no reviews yet.

Be the first to review “Anti-slip mat | 200 x 200 x 4 mm”

Your email address will not be published.

More information on this topic?

Discover our product world

If two surfaces lie on top of each other, the respective surface roughness creates an interlocking effect. This counteracts the sliding force. When anti-slip mats are used, the material fills the gaps between the serrations and a mini form fit is created. This increases the sliding force and therefore also the coefficient of friction. This is the operating principle of anti-slip mats.