Episode 24: Avoiding recourse claims

Recourse claims are almost always a tiresome topic in a company,
especially when claims cannot be averted.

What are the causes and what can be done about them?

Fictitious case study

The experience I would like to share comes from the large area of load securing. However, they can be applied to many other situations.

The day comes when the parts are to be collected.

The truck arrives late. The driver does not speak German and the exact cause of the delay cannot be clarified. Everyone tries to load the cargo as quickly as possible so that the truck can leave the yard.


After a few hours, the police call Alpha and ask for the responsible shipper on the phone.

The forklift driver Klaus reports in. The police inform him that the truck has been checked on the A9 towards Nuremberg and that he is not allowed to continue his journey.

The load is not adequately secured and the truck shows considerable damage that impairs road safety. The load must be reloaded for onward transportation and the driver will also be charged with a violation of ยง22 StVO.

In addition to the expected fine, further costs will now be incurred.

Another suitable truck with the appropriate equipment must be ordered to the highway parking lot on the A9 to which the load can be transferred.

So much for the situation. The task now is to clarify what went wrong and what should have been done better/differently.

Potential for improvement

1. not only the costs must be clarified for a transportation order, but also and above all:

  • What kind of vehicle is required
  • Which safety devices are required
  • Who must obtain the necessary special permits
  • Who pays for the costs if the previous points do not comply with the regulations

2. the loading must be integrated into an appropriate organization. A responsible person must be appointed for this purpose. The person responsible to the legislator is the entrepreneur/managing director. If there is a logistics manager (or similar), the responsibility should be transferred to him by order. In any case, the forklift driver Klaus cannot be the responsible person representing the managing director. There must also be loading instructions indicating the method and type of load securing. It must be designed in such a way that the forces to be expected, as specified in VDI-2700/EN-12195-1, are compensated. A calculation to verify the considerations would also be useful. There should also be a record of this in case the transport insurance company has any questions. It may also be useful to make a photo documentation.

3. when the truck arrives, an incoming inspection must be carried out to see whether the vehicle meets the requirements. A checklist containing all test points is useful for this purpose. If there are any relevant negative points, the loading must be refused and the carrier/forwarder must procure a replacement vehicle at his own expense.

4. an outgoing inspection must ensure that the transport does not leave the factory premises until it complies with the regulations in every detail.

5. where recourse claims could arise:

  • The transportation company, Fa. Charlie, could claim his additional costs because the actual requirement profile was not known or was not expressed clearly enough.
  • The crane company, Fa. Delta, could charge for the useless elapsed time.
  • The customer, Fa. Bravo, could the contractual penalty addressed to him be paid to the supplier, Fa. Alpha, pass through.

More than 25 years of experience in this environment have shown that the biggest problems for most companies, regardless of industry, are to be found in the area of “organization”.

One of the legal bases is ยง130 of the Administrative Offenses Act (OWiG) “Violation of the duty of supervision in companies and businesses”.

Court rulings, which are naturally not always published, contain references to possible solutions. A search term in the Internet browser is “organizational fault”.

A lot of information can be found here that can be reduced to a common denominator.

The common denominator

I would like to recommend these thoughts to every person in a position of responsibility, regardless of organizational level.

Yours, Sigurd Ehringer

Rothschenk assortment

4 good reasons for Rothschenk

SERVICE

Our customer center has only one goal: to turn your problems into solutions. Whether standard stowage cushions, bestsellers or load securing personally tailored to your needs -. we accompany you consistently from A as in field service to Z as in certification. That is our promise to you, as a leader in our industry.

PROFESSIONAL QUALITY

We attach great importance to professional cargo securing. That is why we have our own production, which ensures reliable operation through modern manufacturing technologies and strict quality control. Thus, we offer our customers a comprehensive and high-quality range of services in the field of transport logistics.

CERTIFICATION

DIN ISO 9001:2015, EMAS and Ecovadis are not foreign words to you? Then it's time to work with the best.
You don't take any risks with us - we have been awarded the Platinum Medal on the EcoVadis sustainability rating platform.

SUSTAINABILITY

As a load securement company, we are proud to have several certifications that validate our sustainability efforts and our commitment to environmental protection and social responsibility. For you as a purchaser, this means that we demand and promote the implementation of high environmental and social standards both within the company and along the supply chain.

Leave a Reply

Your email address will not be published. Required fields are marked *

Shipping break from 20.12.2023 to 02.01.2024

The store will remain open during this time. All orders will be shipped again from 02.01.2024. Thank you for your understanding!